Codevala

How to add or delete user in CMD?? 1. Run CMD as Administrator . 2. Type following commands to add a use :           >net user test /add                >net user test /enable:yes         >net user test 123@test here test is a user and 123@test is password. 3. To delete :          >net user test /delete

How to assign Static IP in Windows? 1. Open Run ,  type ncpa.cpl in run menu. 2. Right Click Local Area Network or Ethernet . 3. Find and click on Internet Protocol Version 4 (TCP/IPv4) then Select Properties . 4. Choose Use the Following IP Address.   Use Class B IP address like below   IP                   : 192.168.0.2 Subnet Mask : 255.255.255.0 Gateway is not Required for Sharing.

How to Share data between two windows PC? PC 1 1. Assign Static IP like 192.168.0.2 2. Right Click on folder which you want share. 3. Click on Sharing , then Advance Sharing . 4. Tick Check Mark on Share this folder and change permissions as you want. 5. Click Apply and then ok . PC 2 1. Open Run , Window + R 2. Browse IP by typing \\192.168.0.2 in Run .

Windows 10 can't ping other PC's. 1. Open Run  and type firewall.cpl 2. Click on Advance Setting 3. Click on Outbound Rules on left hand side on top 4. Find File and Printer Sharing (Echo Request - ICMPv4-Out)   5 Then right click and choose Enable Rule

Steps to Change windows password using CMD?? 1.  Open CMD as a Administrator. 2. Type Few commands as followed in Screenshot. 3.  Exit after successfully changing Password. We can Also change password of another users replacing username in place of Administrator.